Thingiverse
Enclosure Hinge
door lrawbone
24
Downloads
12
Likes
1
Makes
Decided to design my own hinge for my printer enclosure (using 15mm extruded aluminum square tubing). Plate dimension (15mm x 60mm)
Use 2 x M6 cap head bolts (20mm to 30mm) as hinge pins which allows you to unscrew the hinge when having to do maintenance / remove the door. Suggest using a 6mm drill to clear out the outer hinge.barrel and allow for smooth operation
Provided an additional hinge with a 3mm higher offset when for example using on a door with Perspex.
Mounting holes 5mm in diameter which allows for "pop rivets" (ideally counter sunk rivets)
Use 2 x M6 cap head bolts (20mm to 30mm) as hinge pins which allows you to unscrew the hinge when having to do maintenance / remove the door. Suggest using a 6mm drill to clear out the outer hinge.barrel and allow for smooth operation
Provided an additional hinge with a 3mm higher offset when for example using on a door with Perspex.
Mounting holes 5mm in diameter which allows for "pop rivets" (ideally counter sunk rivets)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
