Thingiverse
End Feed Shuttle with Pirn
par rvanhoutan
18
Téléchargements
13
Likes
0
Makes
This is an end feed shuttle with pirn.
I used brass wire to make the loops and hooks for the tensioner and super glued them in the holes.
Two of the hooks for the take-up and exit are formed in complete loops the rest can be simple hooks.
Supports are required as well as sanding to get a smooth finish.
The smaller the layer height, the better for the overhangs.
A double-ended bobbin winder is best used for winding the thread on the Pirn.
Use different hooks to route the thread in the tensioner to adjust the tension for your weaving.
I used brass wire to make the loops and hooks for the tensioner and super glued them in the holes.
Two of the hooks for the take-up and exit are formed in complete loops the rest can be simple hooks.
Supports are required as well as sanding to get a smooth finish.
The smaller the layer height, the better for the overhangs.
A double-ended bobbin winder is best used for winding the thread on the Pirn.
Use different hooks to route the thread in the tensioner to adjust the tension for your weaving.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
