Thingiverse
Ender 3 Auto Switch Off
von Max_Pett
36
Downloads
25
Likes
0
Makes
Auto Switch off for the Ender 3.
Switch will be serially connected to the Main Switch, in the End of the Programm the bed will push the switch and the system has no power.
Where to enter the plugs see in the pictures.
Switch is solderd to the cabel, insert the cabel first bevor soldering the cabel!
Additional Things:
How much Conrad Order No. Part (Sorry in German)
2m 1231498 LIY-Z, 2 X 1,5 QMM, SCHWARZ
1m 1570952 SCHRUMPFSCHLAUCH 3:1 SW 2/6
2x 732699 FLACHSTECKHÜLSE MIT ISOLIERUNG
1x 2304636 MINIATUR KIPPSCHALTER 1POL 12,5 X 7X 9,5
(for other switches Step Data must be changed, required 230/110V 2A)
Changed End Code for Cura:
Config=> Printer => Systemsettings
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1
Switch will be serially connected to the Main Switch, in the End of the Programm the bed will push the switch and the system has no power.
Where to enter the plugs see in the pictures.
Switch is solderd to the cabel, insert the cabel first bevor soldering the cabel!
Additional Things:
How much Conrad Order No. Part (Sorry in German)
2m 1231498 LIY-Z, 2 X 1,5 QMM, SCHWARZ
1m 1570952 SCHRUMPFSCHLAUCH 3:1 SW 2/6
2x 732699 FLACHSTECKHÜLSE MIT ISOLIERUNG
1x 2304636 MINIATUR KIPPSCHALTER 1POL 12,5 X 7X 9,5
(for other switches Step Data must be changed, required 230/110V 2A)
Changed End Code for Cura:
Config=> Printer => Systemsettings
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
