Thingiverse
Ender 5 Plus Cable Guide
by macderson
1.1k
Downloads
454
Likes
2
Makes
6/16/2020: I added 2 gcode files for those having trouble slicing the stl file due to (not manifold error with Cura, I do not get that message). the file ending in Ddrive is for direct drive: 1.6mm retract distance, 35mm retract speed)
The Bowden: 5mm retract distance, 45mm retract speed
Both are 60% infill, line infill pattern, 3 walls, support @ 70deg angle touching build plate, with a Brim, 60mm/s print speed, 150mm travel speed.
These were sliced for an Ender-3.
Original: This version extends the arm back to keep the black cable cover from touching any parts of the y-axis motor, and rods.
It also adds support for the Bowden tube.
inspired by thing: thing:3872380
Inspired by: https://www.thingiverse.com/thing:3872380
The Bowden: 5mm retract distance, 45mm retract speed
Both are 60% infill, line infill pattern, 3 walls, support @ 70deg angle touching build plate, with a Brim, 60mm/s print speed, 150mm travel speed.
These were sliced for an Ender-3.
Original: This version extends the arm back to keep the black cable cover from touching any parts of the y-axis motor, and rods.
It also adds support for the Bowden tube.
inspired by thing: thing:3872380
Inspired by: https://www.thingiverse.com/thing:3872380
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
