Thingiverse

endstop switch mount

di Cadfinger

18 Download

13 Likes

0 Makes

This is a bracket for mounting one of those micro endstop switches to 8mm smooth rod. I originally intended to use this style mount for the z axis but It worked well and I ended up using it on the x axis as well. These little switches (pictured above) have a body that measures about 13mm long x 5.8mm wide x 6.2 tall. I designed this bracket in three pieces so that it could be printed without support material and the assembly is pretty straight forward. Use 2 3mm x 10mm bolts to fix the switch receiver piece to the main body of the bracket (or just glue these together with a bit of epoxy as they will not need to be separated again) and 4 3mm x 20mm bolts to capture the cap/saddle around the smooth rod. I have found that this makes a rock solid connection, I have not had one slip yet.

1a 125v switch 8mm smooth rod endstop microswitch prusa Prusai3 replacement reprap switch mount x-endstop z endstop 1a 125v switch 8mm smooth rod endstop microswitch prusa Prusai3 replacement reprap switch mount x-endstop z endstop

Fonte

Thingiverse

Cosa serve per stampare: Intermedio Bassa affidabilità

Perché?

senza supporti · post-lavorazione significativa

Senza supporti Pezzo unico Viteria richiesta

Supporti 0/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 3/3

Stampante

FDM / FFF

Formato file

STL

Materiale

Post-elaborazione

Levigatura, Incollaggio, Viteria

Software

Cura, PrusaSlicer o simile

Ancora nessuna valutazione

Ancora nessun commento – sii il primo!

endstop switch mount

Aggiungi alla collezione