Engine guard slider

This is a slider and its mounting parts that are attached to the 24mm inner diameter hole at the end of the engine guard, etc. The following parts are required for installation. -Slider body 2 pieces 3DP -Fixing parts 4 pieces 3DP -M6x40 cap screws 2 pieces -M6 spring washers 2 pieces -M6 spacer (outer diameter about 7.8mm) L15 2 pieces -SUS G-FAN series SGF-0035 2 pieces https://g-fun.jp/products/detail.php?item=SGF-0035 Also, since the nut included with SGF-0035 has a large outer diameter, you will need to slightly grind down the four places pointed by the screwdriver in the photo with a grinder or similar. Please refer to the photo for the locking mechanism.