Enigma-E slim case

Description:This is a slim case for the official enigma-e kit (https://www.cryptomuseum.com/kits/enigma/).This case allows for the entire PCB to fit on one plate without having to detach the lower half of the PCB.It has inserts for the power button and the charge port and a compartment for a 9v battery. Instructions:Print all the components:1 Battery cover1 Upper half of the case1 Lower half of the case10 Brackets8 DowelsLightly sand the dowels, you want to do a test fit with the PCB in place and you want to be able to fully push them in place but want to keep some friction so that they can stay in place.To keep the two halves of the case together you can use tape on the inside or a little superglue, the small plastic tabs should help with alignment.If you want to be able to easily remove the PCB, all of the brackets are designed to snap in place but if you don't plan in removing the PCB you can glue 8/10 of the brackets to the case but remember to NOT glue the two keeping the batt