Thingiverse
ESP BLE Media Controller
door duke24
81
Downloads
69
Likes
0
Makes
Based on the "oversized MEDIA CONTROL volume knob" from Josef Prusa: https://blog.prusaprinters.org/3d-print-an-oversized-media-control-volume-knob-arduino-basics/
But this version works with an ESP32 and over Bluetooth.
Connect DT from the rotary encoder to D13, CLK to D14 and SW to D12, also connect GND from the encoder to GND from ESP and + to VIN.
The Arduino library can be downloaded on github: https://github.com/T-vK/ESP32-BLE-Keyboard
My arduino sketch can be downloaded here: https://duke24.badberg-online.de/s/ESP32Sketch-mediacontroller
You also need the ESP32Encoder library, wich can be installed directly in the IDE.
In my Video description are more informations, but only in german: https://youtu.be/5yTy5bpx6rk
But this version works with an ESP32 and over Bluetooth.
Connect DT from the rotary encoder to D13, CLK to D14 and SW to D12, also connect GND from the encoder to GND from ESP and + to VIN.
The Arduino library can be downloaded on github: https://github.com/T-vK/ESP32-BLE-Keyboard
My arduino sketch can be downloaded here: https://duke24.badberg-online.de/s/ESP32Sketch-mediacontroller
You also need the ESP32Encoder library, wich can be installed directly in the IDE.
In my Video description are more informations, but only in german: https://youtu.be/5yTy5bpx6rk
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
