Thingiverse
ESP32-S3 DevKitC-1 Case
von peaberry
5
Downloads
7
Likes
0
Makes
This is a case specifically for the ESP32-S3 DevKitC-1 N16R8 (WiFi + 5.0 Bluetooth). This board has 2x USB-C connectors and a WS2812 RGB LED on board. There's an option for an external antenna (you need to desolder and move an SMD resistor for that).
The case is in two halves which snap together. There's a hole included for an external antenna. It has unmarked holes for the RST and BOOT buttons. There's a thinned out section above the RGB LED also.
Prints without support.
Links to the board in question:
https://www.amazon.co.uk/dp/B0F8N8LZ4G
https://www.aliexpress.com/item/1005009298826918.html
https://www.aliexpress.com/item/1005010196291979.html
The case is in two halves which snap together. There's a hole included for an external antenna. It has unmarked holes for the RST and BOOT buttons. There's a thinned out section above the RGB LED also.
Prints without support.
Links to the board in question:
https://www.amazon.co.uk/dp/B0F8N8LZ4G
https://www.aliexpress.com/item/1005009298826918.html
https://www.aliexpress.com/item/1005010196291979.html
peaberry veröffentlicht auch auf
7 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
