eufyMake E1 Origin Reference Jig

March 30, 2026 Update I've added a print profile with slightly shorter arms, which will fit on an A1mini bed. Jan 11, 2026 Update Have added an update 3MF that has more accurate version of the mini flatbed jig (v5), and also includes a version that sets the stop at (10,10) instead, in case you need to be (over-)print slightly to the bottom right of the positioned object. Also added a zip containing SVG files that you can use to test the alignment. I recommend that the calibration card is laser cut on thick board (or thin ply/acrylic etc) to get the best dimensional accuracy and a hard edge to but up against the jig. Then print the other one on the E1, in CMYK (2 layers), making sure it is sized to 265x85mm, and has the bottom right corner at (0,0) in eufyMake Studio. Print onto the calibration card, positioned with the jig, to check the alignment of what your E1 prints compared to the calibration card. By checking the alignment of the lines, you can see how far the origin is off fo