Thingiverse
External Shape Library (Volume 2)
door MaskedRetriever
27
Downloads
23
Likes
0
Makes
So now we have the good stuff. This one has:
* Arduino
* Hobbico Command Standard Servo CS-61
* 6xAA holder
* 4xAA holder
* 4-40 english unit screws and nut (these are what I use; should be easy enough to scale these to your own specs...)
* LEDs
* Standard DC Motor
The DC Motor can be had pretty cheaply:
http://allelectronics.com/make-a-store/item/DCM-296/SMALL-DC-MOTOR-MABUCHI/1.html
The hobby servo's horns are not at all manifold but I decided to leave painstakingly affixing faces in between the horns and the shaft as an exercise to the reader. (You'd only need to do this if you wanted to print a servo replica anyway.)
* Arduino
* Hobbico Command Standard Servo CS-61
* 6xAA holder
* 4xAA holder
* 4-40 english unit screws and nut (these are what I use; should be easy enough to scale these to your own specs...)
* LEDs
* Standard DC Motor
The DC Motor can be had pretty cheaply:
http://allelectronics.com/make-a-store/item/DCM-296/SMALL-DC-MOTOR-MABUCHI/1.html
The hobby servo's horns are not at all manifold but I decided to leave painstakingly affixing faces in between the horns and the shaft as an exercise to the reader. (You'd only need to do this if you wanted to print a servo replica anyway.)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
