Extrusion Test Structure

Test the maximum printing speed of your extrusion system!The model can be scaled in X and Y to fit your buildplate. There is a small notch every 2 mm to indicate a speed change.GUIDELoad, orient and scale the part to your likingEnable Vase printing modeEnable brimSet the layer height to 0.35 mmSet the extrusion width to 0.7 mmSet the speed for external perimeters to 100 mm/sLimit the maximum flow under advanced filament settings to 10 mm/s (this should lead to the whole structure being printed at 10 mm/s, which is nice to factorize)Slice the partAdd a Custom G-Code every 2 mm where you change the speed multiplier. Start at a low value e.g. 60% (=6mm/s) and increase it step by stepe.g.:M220 S60 ;60% speed which means 6 mm/sM220 S220 ; 220% speed which means 22 mm/s