Fable 3 - HF

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.3mm and the Actual Depth is 2mm Filaments Used: PLA eryone matt black Transmission Distance: 0.4 PLA Jayo Red Transmission Distance: 4.6 PLA Jayo Orange Transmission Distance: 6 PLA Elegoo Yellow Transmission Distance: 4.9 PLA jayo white Transmission Distance: 6This print uses 5 unique filaments Swap Instructions: Start with matt black At layer #11 (0.6mm) swap to Red At layer #19 (0.92mm) swap to Orange At layer #25 (1.16mm) swap to Yellow At layer #29 (1.32mm) swap to white for the rest.