Fallout Lap Timer Case [Core V4-V7]

-Fallout Case [Core V4-V7] - Available For Purchase along with all of our custom FPV racing gear @ https://turtlemodefpv.com/products/fallout-case-for-nuclearhazard-core-v4-v7-lap-timers

-Super durable stainless steel case provides protection & directional RF sheilding for NuclearHazard Core V4-V7 FPV lap timer boards...

-Bend X-axis (Back Gauge) dimensions included in photos for quick reference.

-Rivet nuts must extend 5mm (minimum) above the case bottom for adequate circuit board clearance... (Overall rivet length 9mm)

-Material List:
- 18 Gauge / 0.049" 304 Grade Stainless Steel (Case Top & Bottom)
- M3 Rivet Nuts (All 5mm holes) (18 Pcs)
- M3×11mm+6mm Standoff Screws (RaspberryPI Standoff) (4 Pcs)
- M3×6mm Button Head Screws (Core Board & PI Hold Down Screws) (6 Pcs)
- M3×16mm Button Head Screws (Cooling Fan Screws) (4 Pcs)
- S-M3-2 Self Clinching Press Nuts (Cooling Fan Nuts) (4 Pcs)
- Ring Terminal; Wire Size 22-16; Stud Size #6 (Ground To Case) (1 Pc)
- 22ga Wire; 2" length