Famicube (Raspberry Pi 5 case)

This is a case for a Raspberry Pi 5 inspired by a drawing from Niklas Jansson. This is not an easy print, please read the description below. Bill of materialsRequired:WaveShare Connector Adapter: https://www.aliexpress.com/item/1005007407974727.html8x M2.5x5 screws to secure the connector adapter and the Raspberry Pi, Bambu Lab has some in their shop: https://uk.store.bambulab.com/products/m2-5-button-head-cap-machine-screws-bhcs-1?id=416279944561242x M3x40 screws to secure the case (the Bambu Lab shop doesn't seem to have M3 screws that are 40mm long)Recommended:WaveShare PCIe to M.2 adapter board: https://www.aliexpress.com/item/1005006691876107.htmlBambu Lab PLA Basic Maroon Red (10205) (it's the closest color to the Famicon red I've found)Bambu Lab PLA Basic Sunflower Yellow (10402) (it's the closest to the Disk-kun yellow)Bambu Lab PLA Matte Ivory White (11100) (Basic White should work but will create shinny areas on overhangs, matte filament fixes this)Bambu Lab P