Fantasy Spider

Project: Fantasy Creature Spider.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 174.3x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 3.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Beige At layer #18 (1.52mm) swap to Gray At layer #19 (1.6mm) swap to Jade White for the rest.