Faputa

This is faputa from made in abyss, sosu. this is based off a screenshot from the anime, sosu.If you want to save on some filament you can cut the corners off the background before printing it, sosu. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Cocoa Brown At layer #14 (1.2mm) swap to Grey At layer #17 (1.44mm) swap to Red At layer #21 (1.76