Thingiverse
Fast FaceShield - FFShield
par plasmatree
2
Téléchargements
0
Likes
0
Makes
As the name implies, the Fast FaceShield (FFShield) is optimised for fast printing: 12 min per headband, 3 fit standard 200x200 bed.
While the Prusa faceshield is designed for relatively thick foils, this one is for lighter sheets, especially clear cover sheets with 150-300µm and A4 size (can be bought in packs of 100). Holes align with standard A4 paper punches. Use fabric elastic band with slotted holes at the end for simple attachment. The head band nicely conforms to the head.
Print with single perimeter, 0.3mm layer height. Line width of 0.5mm (even if you have a 0.4mm nozzle). Material should be PETG. (PLA might be too brittle, not tested though...)
While the Prusa faceshield is designed for relatively thick foils, this one is for lighter sheets, especially clear cover sheets with 150-300µm and A4 size (can be bought in packs of 100). Holes align with standard A4 paper punches. Use fabric elastic band with slotted holes at the end for simple attachment. The head band nicely conforms to the head.
Print with single perimeter, 0.3mm layer height. Line width of 0.5mm (even if you have a 0.4mm nozzle). Material should be PETG. (PLA might be too brittle, not tested though...)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
