Faster Cheaper Polymaker Reusable Spool

The Polymaker Reusable Master Spool is great, but having the holes modeled into the part means the slicer has to create a lot of perimeters (which makes for slow printing). The slicer is optimized for creating sparse infill patterns that we can use to improve print speed dramatically (same print time as the solid version of the Polymaker spool), and it has the side benefit of using 15% less material (saves about $1 if printing in ASA)If you want to use 25mm RFID tags (such as the MIFARE 1k) check out my other remix: https://www.printables.com/model/1484265-polymaker-reusable-spool-for-25mm-rfid-tagsYou will need to do the following in your slicer to get this to print as intended:Split each STL into partsKeep the settings for the large pieces as you normally would For the thin parts (it should be the ones with _2 in the part name within your slicer), set the following parameters:Wall loops: 0Top shell layers: 0Bottom shell layers: 0Sparse infill density: 20%Fill multiline: 2Sparse infil