Thingiverse
Fazua Plug
von AEtherScythe
14
Downloads
10
Likes
0
Makes
This is a bottom bracket plug for the Fazua Evation. The part is designed to be printed in flexible material, such as TPU or MJF with a Shore A hardness of 85-95.
I made this with TPU in mind to keep rain out when the bike is parked outside with the motor assembly removed.
The "triangular" section is made slightly oversized on-purpose so that with flexible material it will fit more snuggly. It is likely too large to fit if you use a hard material, but I didn't test that; let me know in a comment if you do try it with a hard material and whether you need a tweak for it to fit.
I made this with TPU in mind to keep rain out when the bike is parked outside with the motor assembly removed.
The "triangular" section is made slightly oversized on-purpose so that with flexible material it will fit more snuggly. It is likely too large to fit if you use a hard material, but I didn't test that; let me know in a comment if you do try it with a hard material and whether you need a tweak for it to fit.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
