Fidget can

My daughter asked me to create her a foldable can or a pen holder to store all the pens and stuff at school. The design is very customizable, just change the infill pattern and the colours. You can add a standard rubber ring but it isn´t mandatory. The design had to be quite precise so the tolerances are tight and you need to level you bed properly. The assembly is intuitive but not easy. You will need to apply some gentle force to connect everything properly.If you are having problems please follow the instruction below, this procedure worked really well for me.1.Choose your design and print all parts 2. Start with adding the rubber band. The bracket is still a bit connected to the part and you need to break it from the surface so it can be bended. This is one of the more difficult parts, at first its difficult but after you figured it out it´s easy. 3. Connect the remaining parts to the rubber band, check the orientation! The last 2 parts will be a bit more difficult but you will mak