Fidget Spinner Mitsu

I make a Spinner called Mitsu.

Its a lighter one.

You need 9 x 8mm balls

The holes for the balls are concave so that the balls hold in these.
Put the balls with a hammer or something under a little pressure in to it.

For better Spinning you have to clean the bearings from the oil.
- remove the black caps from the bearing.
- soak it 3-5 hours in Aceton or something and shake it sometimes
- blow the bearings with compressed air

Bearings: 608-RS :
http://www.ebay.de/sch/i.html?_from=R40&_sacat=0&_nkw=608+rs+bearing&rt=nc&LH_PrefLoc=2

Balls: 8mm:
http://www.ebay.de/sch/i.html?_odkw=stahl%C3%B6kugeln+8mm&LH_PrefLoc=2&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xstahlkugeln+8mm.TRS0&_nkw=stahlkugeln+8mm&_sacat=0