Fidget Spinner

This simple and clean fidget spinner is designed to be print-in-place, so it prints fully assembled and ready to spin — no extra assembly or hardware required!✅ Features Fully 3D printable in one pieceFunctional bearing with integrated ballsMinimalist, modern designGreat for stress relief and fun⚙ Print recommendations Material: PLA or PETGLayer height: 0.2 mm (or finer for smoother movement)No supports needed2-3x walls20% infill recommended for extra strength (optional)Make sure your print bed is properly cleaned to ensure good adhesion and avoid print failuresIf your first layer isn’t perfectly calibrated, consider increasing the elephant foot compensation slightly to prevent the bottom edges from fusing and blocking movement💡 Tip After printing, gently loosen the moving parts — you can also add a tiny bit of lubricant if you'd like it to spin even more smoothly. Check my another fidget spinnerhttps://makerworld.com/en/models/1619070-planetary-gears-fidget-spinner#profileId-1708