Fidget Spinner

This is a basic fidget spinner that uses nuts as weights to reduce the cost. The spinner requires 3xM8 nuts and 1x608zz ball bearing. The size of M8 nuts vary due to manufacturing error margin and thus it may be necessary to add a drop of super glue onto 2 faces of each nut before inserting them. The caps for the bearing can be excluded but is recommended. The ball bearing clips in from one side only, if the bearing is loose, wedge the bearing in with a piece of paper or something thin. One of the caps has a slightly smaller diameter and this cap should fit in the side where a lip stops the ball bearing from coming out. The other cap can be pushed in and should fit snugly. The caps can be printed in different colours than the fidget spinner body itself, just for some fun!