Filament Sample Holder

This filament sample holder is intended to be used with the samples created by Extrutim and can be found here. Update 2024-02-12: I have created a v2 of the model with a small lip to hold the samples in place when opening the AMS. I have made the sample holder to be able to stick to the AMS of Bambulab, so I can see which filaments are in there in which position.On the filament samples I print the hotend and bed settings as well, so I know what to use as recommended settings. My workflow is to always create a filament sample for each new filament and keep it in the box that I printed by Extrutim. When switching filaments, I also replace the sample in the holder. What you additionally need:double sided tape I used the following settings to print in 1.75 PETG with 0.4 nozzle:layer height0.2mmwalls2top shell layers2bottom shell layers2infill15% gridraft or brimnonesupportno need if oriented right way up Leave a like, make or remix as you like!