Fire Druide

Size 150x200mm. Do NOT adjust the thickness (Z) in your slicer! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Nozzle: 0.4 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. You may print at higher layer heights below the Min Depth of 0.72mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use. Filaments Used: PLA Elegoo + Black Transmission Distance: 0.3 PLA PolyLite Natural Transmission Distance: 21 PLA Elegoo + Red Transmission Distance: 3.7 PLA Elegoo+ Yellow Transmission Distance: 4 PLA Elegoo+ White Transmission Distance: 8.9 This print uses 5 unique filaments   Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Natural At layer #13 (1.12mm) swap to Red At layer #15 (1.28mm) swap to Yellow At layer #17 (1.44mm) swap to White for the rest.