Firefighter HueForge

The original image is taken here (with the permission of the resource owner): https://vk.com/wall-191604209_10615Aleksandr https://makerworld.com/en/@Alekssandr provided great help in creating this project.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 200x132.81mm in size. You can adjust the dimensions along the X and Y axes proportionally, but do not change the height of the model (Z axis).You may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 3.4mm and the Actual Depth is 2.9mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Red Transmission Distance: 1.5 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA Overture Highlight Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Cyan Transmission Distance: 3.5This print uses 7 unique filamentsSwap Instructions: Start with Black At l