Firefly

流萤多色浮雕照片 打印设置：使用100%填充，0.08层高，0.16首层打印开始打印使用黑色在 #9 (0.8mm) 切换成灰色在 #13 (1.12mm)切换成白色 材料（PLA/PETG）二者即可 PETG Black Transmission Distance: 0.3 PETG Gray Transmission Distance: 2.5 PETG White Transmission Distance: 3不同的耗材会引入色差 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm