Firing Charizard

You can resize this model in X and Y . Please verify that you don't resize it on Z Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.5x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA+ Sunlu Yellow Transmission Distance: 10 PLA+ Sunlu Sky Blue Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #22 (1.84mm) swap to Sky Blue for the rest.