First Layer Multicolor Test Print

The purpose of this project is to give users a simple test print file to see the differences between printing lighter filament first and printing darker filament first. You can also note the dimensional differences between printing text first or second. An AMS is required for this print. Make sure you have 4 different colored spools loaded into AMS slot, then when you re-synchronize your filaments, the entire 3mf will automatically update so you shouldn't need to repaint anything. Let me know if there's any issues. Sometimes a random letter of number will vanish when you slice the file. If that happens, paint the letter to a different color, then paint it back to its original color, and it should fix the problem. To improve your multicolor first layers, simply lower the initial layer line width to 0.30mm - 0.32mm. If you're still having too much filament bleed, you can recalibrate your flow rate. Or, just try lowering it from 0.98 to 0.95 to 0.92, and note the differences. Also when wo