Fish scale

This is a working fish scale that can be used to weigh that can hang from it from now on I will refer to the parts as they are named in the files printing:print all the parts on a flat side assembly:use the images to help with assemblytake the base and place the 10 tooth gear on the pin under the extruded rectanglenow grab a rubber band, tie a knot on one side and slip the other side through the hole on the back of the dial gearnow place the dial gear on the pin in the middleplace the hook in the vertical opening on next to the 10 tooth gear. Make sure the hook meshes properly with the 10 tooth gearnow place the other side of you rubber band on the remaining pin. If the rubber band appears too loose figure eight the rubber band an hook it on again, repeat this process as much as necessaryplace the cover on the base until it clicks, or until it is flush. Tuning:to tune the scale repeat step 5 as much as necessary until it properly displays a known weightNow write that weight onto the co