Fitting PC4-M10

Read before print! In the slicer, the hole compensation must be adjusted to your PTFE hose so that it fits well.Currently it is set to +0.12mm and a 4mm hose fits tightly. For a perfect thread fit, the XY contour compensation should be adjusted. Currently it is set to -0.05mm The PC4-M10 fitting dummy is not airtight, it is only used to hold PTFE hoses where you can save yourself a normal fitting. You can use the fitting for my Drybox, for example, it works very well. https://makerworld.com/en/models/39426