Thingiverse
Five33 Tiny Trainer Fixed Camera Mount
by joshhowell
25
Downloads
15
Likes
0
Makes
A fixed camera mount for the Five33 Tiny Trainer. 45deg and 50deg
Designed for:
Foxeer Nano Predator with 1.7mm Lens, 13mm diameter (mount upside down)
Runcam Racer Nano with 1.8mm Lens, 12mm diameter (mount upside down)
Runcam Nano HDZero with original lens, 10mm diameter
V2 Design shifts the camera up a little hiding the connector inside the mount so the battery does not interfere with it. HDZero 50deg mount shifts the camera away from the standoffs so the camera doesn't touch them. Also added slots in the standoff sleeves to make it easy to cut for clearance from the flight controller.
May need to rotate object in slicer so that the bottom is face down on the print bed.
Print without supports.
Designed for:
Foxeer Nano Predator with 1.7mm Lens, 13mm diameter (mount upside down)
Runcam Racer Nano with 1.8mm Lens, 12mm diameter (mount upside down)
Runcam Nano HDZero with original lens, 10mm diameter
V2 Design shifts the camera up a little hiding the connector inside the mount so the battery does not interfere with it. HDZero 50deg mount shifts the camera away from the standoffs so the camera doesn't touch them. Also added slots in the standoff sleeves to make it easy to cut for clearance from the flight controller.
May need to rotate object in slicer so that the bottom is face down on the print bed.
Print without supports.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
