Fixed Angle FPV Camera Mount Generator

**OpenSCAD** FPV camera mount generator.

TL;DR
====================
+ Edit the first 6 settings
+ Don't bother changing $fs
+ Render too see curves and save STL
+ Dimensions are in mm
+ Visit http://www.openscad.org/ for the software to render this

Using the Generator
====================
Simply change the variables to suit your frame, camera and preferred amount of camera up-tilt.

There are sensible defaults set for most of the variables so you only really need to change a handful of them for most applications (example below). If using OpenSCAD you will need to do a proper render to see the curved corners due to the way the fillets are built. You will also need to render it before you can export a STL file for printing.

If you don't have OpenSCAD installed you can use the 'Open in Customizer' button to generate your STL file. This does seem a bit buggy though so your mileage may vary.

Common Settings
====================
The common settings you need to change