Thingiverse
Flange
di RLazure
52
Download
47
Likes
0
Makes
This **flange** is intended to slip over a pipe and be held on to plywood. The original use was to make an old English lamp post as a prop for a parade. 3" ABS pipe is used to support the lamp housing.
**Flange2.stl** has a 90 mm inner_dia which works well for a 3" diameter ABS pipe. The depth iis 80 mm with a 4 mm flange thickness. The screw hole radius is set at 2.5 mm which works well with #8 screws.
**Flange2.stl** has a 90 mm inner_dia which works well for a 3" diameter ABS pipe. The depth iis 80 mm with a 4 mm flange thickness. The screw hole radius is set at 2.5 mm which works well with #8 screws.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
