Flash HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 128.77x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Maroon Red At layer #14 (1.2mm) swap to Yellow At layer #16 (1.36mm) swap to Jade WhiteBorder Only Colors from here until the end. At layer #28 (2.32mm) swap to Black for the rest.