Flash Lightbox LED Lamp

"Flash 3D Model" ⚡ Embrace the lightning speed of the Scarlet Speedster with this spectacular Flash 3D model! Inspired by the iconic character from the DC Universe, this intricately designed piece will infuse your space with a burst of superhero energy. Recommendations before and after printing:   • Use textured PEI sheet • To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole • For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover • Be careful to clean the table well   Materials and tools used to assemble parts:   • Aluminum Tape for the back cover • Hot glue pistol to place in the spacing of the LEDs so they don't come off • Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch • White or RGB LEDs   To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!