Thingiverse
Flat Cut Tool
door Cagatay
36
Downloads
16
Likes
1
Makes
(R=0.7mm to 2.6mm) / (2R=1.4mm to 5.2mm) [1.4_1.6_1.8... etc]
No support need while printing.
It needs %100 infill, otherwise you will cut the shell on the first knife move!
I suggest use 0.4 nozzle and 0.1 layer or under.
Good things require patience ;)
Note: obj file is like stl. You can easily use it in the slicer program.
Needs
m3x10 bolt X3
m3 nut X3
No support need while printing.
It needs %100 infill, otherwise you will cut the shell on the first knife move!
I suggest use 0.4 nozzle and 0.1 layer or under.
Good things require patience ;)
Note: obj file is like stl. You can easily use it in the slicer program.
Needs
m3x10 bolt X3
m3 nut X3
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
