Thingiverse
Flatpanel Askar 71F
door Zyniker
1
Downloads
0
Likes
0
Makes
The Parts used for the completion are:
Adafruit EL Panel 10 x 10 cm https://www.adafruit.com/product/625
12V EL wire/tape inverter https://www.adafruit.com/product/448
DC 12V hohlstecker 5,5 MMX 2,1mm Adapter https://www.amazon.de/dp/B0C5X63DFR
The wiring is really simple: just solder the red an black wires to the corresponding red and black wire on the plug. This can be plugged into all the usual 12V powersupplys. Im my case this is plugged into a Stellavita and is controlled via the app on the tablet. I take 0.3 second flats with the light emmitted by this specific lightsource.
Adafruit EL Panel 10 x 10 cm https://www.adafruit.com/product/625
12V EL wire/tape inverter https://www.adafruit.com/product/448
DC 12V hohlstecker 5,5 MMX 2,1mm Adapter https://www.amazon.de/dp/B0C5X63DFR
The wiring is really simple: just solder the red an black wires to the corresponding red and black wire on the plug. This can be plugged into all the usual 12V powersupplys. Im my case this is plugged into a Stellavita and is controlled via the app on the tablet. I take 0.3 second flats with the light emmitted by this specific lightsource.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
