Thingiverse
Flex Track Bracket
von engineer_chris
0
Downloads
0
Likes
0
Makes
This is a 3D printed adapter to support Flex Track at 90 degrees to a surface.
Originally designed to aid mounting lengths of Flex Track to wooden boards for a science demonstration.
Requires 2 x M3 screws, washers and nuts per bracket. The low profile head screws are much better.
The design uses a 10mm diameter plug to locate into the wooden frame with an optional hole to allow an additional securing screw.
The design file is in OpenSCAD and can easily be changed.
Originally designed to aid mounting lengths of Flex Track to wooden boards for a science demonstration.
Requires 2 x M3 screws, washers and nuts per bracket. The low profile head screws are much better.
The design uses a 10mm diameter plug to locate into the wooden frame with an optional hole to allow an additional securing screw.
The design file is in OpenSCAD and can easily be changed.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
