Flexi Astronaut

Take your prints to orbit with this Flexi Astronaut! This fully articulated, print-in-place model is designed to come off the build plate as one complete piece, featuring flexible joints in the arms, legs, and body for smooth movement and a fun, interactive feel. With a detailed helmet, suit textures, and a low-profile “laid flat” pose, this astronaut is both a great display piece and a satisfying fidget toy. Due to the design of the limbs and overhangs, proper support settings are essential for a successful print. Key Features 🚀 Print-in-place design (no assembly required) 🔄 Fully articulated arms, legs, and body 🧑‍🚀 Detailed astronaut suit and helmet 🎯 Designed to lay flat for stable printing ⚡ Fun, flexible, and beginner-friendly with proper setup ⚠️ IMPORTANT: SUPPORTS REQUIRED 🌳 Tree supports are REQUIRED for this model Recommended placement: Under arms and hands Under legs and boots Around helmet overhangs Tree supports help preserve detail while minimizing scarring and making cleanup easier. Recommended Print Settings Printer Type: FDM Nozzle: 0.4 mm Layer Height: 0.16–0.2 mm Infill: 10–15% (Gyroid or Grid) Walls: 2–3 Supports: Tree supports ON (Required) Support Density: 10–15% Support Placement: Build plate only (recommended) Speed: 40–60 mm/s Material Recommendations PLA (Best choice) → clean details and easy support removal PLA+ → stronger joints PETG → works but may be harder to remove supports cleanly Print Tips Use tree supports only for best results Lower support interface density for easier removal Let the print fully cool before removing supports Take extra care when removing supports near joints A slightly slower print speed improves detail on the suit Scaling Designed for 100% scale Can scale slightly, but small scales may affect articulation Larger prints improve strength and movement Orientation Print flat on the build plate (default orientation) Do not rotate—optimized for best joint clearance and support placement Creator Note This model is de