Flexi Mickey Mouse

Flexi Mouse Mini – Print-in-Place (No Supports) A compact, fully articulated Flexi Mouse Mini designed for smooth print-in-place performance. This model prints as a single piece with built-in joints that move freely right off the build plate—no assembly required. The design focuses on reliable tolerances and clean separation between segments, making it an easy and satisfying print for beginners while still being a fun addition for experienced makers. Perfect as a desk toy, fidget, collectible, or quick test print. Key Features 🐭 Print-in-place design (fully assembled after printing) 🔄 Flexible articulated body 🧵 No supports required ⚡ Fast print time 🎯 Optimized for consistent results Recommended Print Settings (Profile) Printer Type: FDM Nozzle: 0.4 mm Layer Height: 0.16–0.2 mm Infill: 10–15% (Gyroid or Grid) Walls: 2–3 Top/Bottom Layers: 3–4 Speed: 40–60 mm/s Supports: OFF Adhesion: Brim optional (3–5 lines if needed) Material Recommendations PLA (Best) → clean articulation, easiest print PLA+ → slightly stronger joints PETG → works well, reduce stringing & increase cooling ⚠️ TPU not recommended unless tuned carefully Print Tips Ensure first layer is not over-squished (prevents fused joints) Let the model fully cool before moving joints Gently flex each segment to free movement after printing If joints feel tight: lightly wiggle side-to-side instead of forcing Scaling Works best at 100% scale Can scale down to ~80% depending on printer tolerance Scaling up improves articulation smoothness Orientation Print flat on the build plate (default orientation) Do not rotate—model is designed for optimal bridging