Flexi Octopus

I made a movable octopus toy. The octopus has movable eight tentacles consisting of nine segments. I made the octopus beady-eyed, added suction cups to the tentacles, and made the skin of the octopus more realistic.You can download 3MF Creality file where the octopus suction cups and eyes are pre-painted and print it in different colors or download STL files to print it in one color and paint it with acrylic paints yourself, I also added STL files of the octopus body without eyes and separate eye files so you can print them separately in different colors and glue the eyes with glue.If you don't have the equipment to print the models in different colors, but you want to print the suction cups in a different color, you have only two options:1) Print the first layers in a different color, but not only the suction cups but also the tentacles will be painted.2) Paint the suction cups with acrylic paint using a brush or airbrush.The model is printed without supports and consists of small parts, so do not use a textured plate. Textured plate is not designed for such small parts. If you want a well printed model without defects use a smooth plate, remember to calibrate the table, wash the plate well before printing and you can also use 3D glue to securely bond the model to the surface of the table.I have not tested the model in smaller scale, if you want to reduce it in the slicer and print it smaller, the model may be too fragile because the connecting rings have diameter from 2.2 mm.________________________________________________________Don't forget to share your prints________________________________________________________If you have any problems, please email me________________________________________________________All my models are for personal use only________________________________________________________Don't forget to subscribe to me________________________________________________________All of my designs are protected by copyright law. Your purchase does not a