Flexi Rainbow Fish

Download here now the new hi flexi rainbow fish Simple to build & print - All you need is a small amount of superglue or 3D gloop & can be built easily in under 10 minutes Can be printed in multi-color using any 3D printer - The head, eyes and body sections are printed separately and the eyes can be printed in 2 colors by pausing the print and swapping colors. Print settings - Supports enabled on the head section only (tree recommended) No support or brim anywhere else Z-hop enabled to help bed adhesion If using the connectors to assist with gluing the body recommend printing very slowly (10mm/s) But these are non essential Build instructions - Once printed and supports are removed from the head glue the 2 eyes in the sockets on the head You can carefully insert the connectors into their small slots on the fins if you choose to use them If you decide to not use the connectors, simply apply glue to the fins on 1 side and align with the opposite side of the body and glue - it'