Flexi Squid

This is a cute, articulated, flexi squid. After making my cute worm, (which you should see if you haven't already), I tested my newly learned skills by making this. If you look closely, you'll find that this is the exact same chain (with some tolerances adjusted to make it flex better.I was inspired by the flexi octopus and decided to make this.Print SettingsPrinter brand:ELEGOOPrinter:ELEGOO NEPTUNE 4Rafts:NoSupports:NoResolution:0.16-0.2 mm (I used 0.16)Infill:I used 20% infill, lightning pattern, but I'm pretty sure it doesn't matterFilament brand:ElegooFilament color:Any (although if you use black, the eyes will be a bit harder to seeFilament material:PLANotes:Any printer should be able to print this (the tolerance is 0.2 mm). All it takes are the right slicer settings.DO NOT use horizontal layer expansion. These walls are adapted to exactly fit a 0.42 line width. If you use a negative horizontal layer expansion, you'll find that the walls will be brittle, thin,