Flow Pot

Flow PotFunctional, sleek plater Printing recommendations & AssemblyI Highly suggest PETG or ASA if your print will be outside(Note: direct contact with soil is not ideal, as it may block the drainage holes—unless you place a small filter above them.) Alternatively, Matte PLA with fuzzy skin(Process>others>Special mode>fuzzy skin>Contour) can give your print a more professional finish. The planter is made of two parts:The potThe water reservoir base (mandatory)Assembly is super simple—just stack the pot on top of the base. They align perfectly. Scaling & DimensionsIf you need the the planter for small plants or bigger plant you can adjust the scale of the models from 33% to 150%. I don't recommend going beyond this range, as the water hole may become too large or too small.📸 Images shown are from a print scaled to 85%, using Anycubic black PETG.‼️IF YOU NEED A BIGGER VERISON PLEASE LET ME KNOW IN THE COMMENT‼️ Standard dimensions:Pot: External 80×80×82.5 mm / Internal 74×74×77 mmB