Thingiverse
Flute rack
von JKoehorst
3
Downloads
3
Likes
0
Makes
A nice and basic free standing rack to hold 6 recorders.
Fits the Soprano, Alto and Tenor sizes (all in picture).
Print instructions:
I made this design for the Bambulabs A1mini. The left and right parts can be split into 3 parts to fit the small bed of the A1mini. Use the function "Split to objects" with the part selected.
The rods are best printed laying down.
Standard 0.4mm nozzle and 0.2mm layer height are fine. But use some support for the square holes if printed in parts (see picture).
Update:
I included the parts as STP files too.
"Flute rack L" and "Flute rack R" are complete parts if you have a bigger printbed. Otherwise just use the '...Base', '...Stand' and '...Shelf' parts and glue them together in the joints.
Fits the Soprano, Alto and Tenor sizes (all in picture).
Print instructions:
I made this design for the Bambulabs A1mini. The left and right parts can be split into 3 parts to fit the small bed of the A1mini. Use the function "Split to objects" with the part selected.
The rods are best printed laying down.
Standard 0.4mm nozzle and 0.2mm layer height are fine. But use some support for the square holes if printed in parts (see picture).
Update:
I included the parts as STP files too.
"Flute rack L" and "Flute rack R" are complete parts if you have a bigger printbed. Otherwise just use the '...Base', '...Stand' and '...Shelf' parts and glue them together in the joints.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
