FlyingBear Ghost 5 Height Extension

UPD 08.04.2024: re-uploaded corner files in correct orientation

FlyingBear Ghost 5's kinematic parts have a lot of unused range that can not be utilized due to constraints made by other parts.
However, the maximum height of the print area can be extended fairly easily, only requiring 6 3d-printed parts, some longer screws and some cable extensions. Extending the print head cable on this model is not unheard of, it is a common change made when upgrading this printer to a direct extruder. The portal cable (black) does not need to be extended, even for the extension kit for 50mm, as long as you use a direct feeder, as the feeder wires and filament sensor wires are the shortest and they would be the only ones that can't reach their destination.
The range of motion can be extended by a total of 42 millimeters for the original head, 52 millimeters for Lime Head, and 56 for Lime Head if the plastic part of Z-axis nut is removed and there is no restricting bearing at the top, i.e. when us