Thingiverse

Foldable Brushed Microquad

di ulflindestrom

5.5k Download

5k Likes

29 Makes

Vai al Modello

This one doesn't make much sense (since when are micros too big?), but it's cute...

83x58mm when folded, 138mm motor-to-motor (diagonally) when unfolded. So no, its not very micro, I know. And it's one heavy micro, don't expect to do any acro with it. I designed it mostly because I had an idea and I like to draw stuff ;)

The Quanum micro camera/vtx combo from HobbyKing fits perfectly and the camera angle is adjustable between 0 and 30 degrees. The arms have slots for clean wiring and to prevent accidental cutting of motor wires when folding the arms.

I'm running mine with the following hardware:
* Beef's Brushed Board (flashed with Betaflight)
https://www.fpvheadquarters.com/beef-s-brushed-board.html

* 8.5mm (outer diameter) brushed motors
https://www.fpvheadquarters.com/angry-beez-8mm-brushed-motor-set.html
http://www.banggood.com/Chaoli-CL-820-8_5x20mm-Coreless-Motor-for-90mm-150mm-DIY-Micro-FPV-RC-Quadcopter-Frame-p-1054803.html

* Parrot Rolling Spider propell

drone fpv frame microquad miniquad multirotor Quadcopter Quadcopter Frame drone fpv frame microquad miniquad multirotor Quadcopter Quadcopter Frame drone fpv frame microquad miniquad multirotor Quadcopter Quadcopter Frame

Fonte

Thingiverse

Cosa serve per stampare: Intermedio Bassa affidabilità

Pezzo unico Viteria richiesta

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 1/3

Stampante

FDM / FFF

Formato file