Forest Cat

A Wildcat - HueForge in the size of 200 x 200mm and 3 colors. The image is 200x200mm in size and can be scaled as desired. Please note that only "X" & "Y" may be scaled, but NEVER "Z"! Info: If Bambu Studio complains about floating parts, either ignore it or turn on supports. In both cases, nothing will happen, and it won't print supports, but it has a blurred image edges and Studio thinks it has floating parts. Print Instruktion:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Red At layer #11 (0.96mm) swap to Orange At layer #16 (1.36mm) swap to Yellow At layer #23 (1.92mm) swap to Ivory White for the rest. Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Ivory White Trans